Здравствуйте, необходимо подключить USB DisplayLink монитор к linux серверу с CentOS 6 Linux version 2.6.32-358.23.2.el6.x86_64
Монитор можно увидеть тут:
MIMO UM-710S USB Powered 7" Swivel LCD Screen Mini Display


lsusb:
Bus 002 Device 006: ID 17e9:401a DisplayLink

dmesg:
usb 2-1.5.2: Product: mimo inc
usb 2-1.5.2: Manufacturer: DisplayLink
usb 2-1.5.2: SerialNumber: 7040565
usb 2-1.5.2: configuration #1 chosen from 1 choice
generic-usb 0003:17E9:401A.0001: hiddev96,hidraw0: USB HID v1.10 Device [DisplayLink mimo inc] on usb-0000:00:1d.0-1.5.2/input1
udlfb: DisplayLink mimo inc - serial #7040565
udlfb: vid_17e9&pid_401a&rev_0118 driver's dlfb_data struct at ffff880219c77800
udlfb: console enable=0
udlfb: fb_defio enable=0
udlfb: vendor descriptor length:23 data:23 5f 01 0021 00 04 04 07 00 01
udlfb: DL chip limited to 1500000 pixel modes
udlfb: allocated 4 65024 byte urbs
udlfb: 800x480 valid mode
udlfb: Reallocating framebuffer. Addresses will change!
udlfb: 800x480 valid mode
udlfb: set_par mode 800x480
udlfb: DisplayLink USB device /dev/fb1 attached. 800x480 resolution. Using 1504K framebuffer memory